[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Primary question
- To: tesla@xxxxxxxxxx
- Subject: Primary question
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 16 Nov 2005 18:29:13 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 16 Nov 2005 18:30:32 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <Rv2AWB.A.MUH.109eDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "bmcpeak" <bmcpeak33@xxxxxxxxxxx>
Hello group,
I would like to get the groups opinion on primary form for the 2
coils I am building.
Should I go with a Flat primary or a 15 degree. Specs are below...
Coil one... Secondary 3 inch od 1/8 inch wall acrylic form 894 turns
of #26 heavy magnet wire, power 7500/60 NST, LTR MMC .03Uh.
coil two... Secondary 6 inch od 1/8 inch wall acrylic form wound with
800 turns of #22 heavy build magnet wire, power 15/60 NST. LTR MMC .015 Uh.
T.I.A!!!
Brad McPeak