[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Testing Pulse Caps
- To: tesla@xxxxxxxxxx
- Subject: Re: Testing Pulse Caps
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 15 Nov 2005 17:34:27 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Tue, 15 Nov 2005 17:39:51 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <SOoWmB.A.eyG.T_neDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "MIKE HARDY" <MHARDY@xxxxxxxxxx>
Can I do this by simply halfwave rectifying the output of a NST? Will I blow
a dvm in this configuration? Maybe I should dust of my old multimeter.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, November 14, 2005 10:34 PM
Subject: Re: Testing Pulse Caps
> Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
>
>
> If these leakage current is below 1 mA at 10-15 kV DC, it should be
> fine at higher voltages --- in most cases.
>
> Dr. Resonance
>
>
> >It's easy enough to asure a cap is good with a meter, but how does
> >one find out if a pulse cap is good near the actual high operating
> >voltage it will see?
> >
> >
>
>