[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: New to this
- To: tesla@xxxxxxxxxx
- Subject: Re: New to this
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 14 Nov 2005 21:35:04 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Mon, 14 Nov 2005 21:37:51 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <OffK8.A.MeC.eYWeDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
I would just consider using a standard 12 kV 30 mA NST available used
at most neon sign shops. Contact me off-list and I will email you a
set of plans for a nice coil using this xmfr.
our website at www.resonanceresearch.com
Dr. Resonance
Hey everyone, I'm new to this so I was wondering if I could get as
much help as possible.
First of all, I'm a senior Electrical Engineering student at
Youngstown State University in Youngstown, OH. We have a small
group of people that are trying to start a school funded group
interested in high-voltage design and testing, and recreating some
of Tesla's experiments. I've always been interested in Tesla Coils,
but could never find many people local to me that had any knowledge
of building them.
I just bought some transformers and I was wondering if they would be
good ones to start with. I'm not looking for two foot arcs or
anything super impressive like that, just to keep in mind. The
transformers I just bought are 120Vac input, with 1650 Vac output at
10mA. I have 6 of them, so wiring for additional current if needed
is not a problem.
If anyone could give me an idea of what to really look for, I would
appreciate it.
Thanks!
--
Stephen Timko