[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Terry Filter Question
- To: tesla@xxxxxxxxxx
- Subject: Re: Terry Filter Question
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 11 Nov 2005 06:33:23 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- In-reply-to: <004501c5e5eb$38e73940$0201a8c0@brad>
- Old-return-path: <vardin@twfpowerelectronics.com>
- References: <004501c5e5eb$38e73940$0201a8c0@brad>
- Resent-date: Fri, 11 Nov 2005 06:33:33 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <wW1DUD.A.SPC.s2JdDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Terry Fritz <vardin@xxxxxxxxxxxxxxxxxxxxxxx>
Hi Brad,
You could probably go to eight MOVs total for that voltage. I would
not change anything else.
Cheers,
Terry
At 04:38 AM 11/10/2005, you wrote:
I am about to build a "Terry Filter" for my coil powered by a 7.5kv
60 ma NST. The printout I have list components down to a 9kv transformer.
Do I need to decrease the number of MOV's and change resistor size
for my transformer?
Brad McPeak