[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: cap/mmc inquirery
- To: tesla@xxxxxxxxxx
- Subject: Re: cap/mmc inquirery
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 02 Nov 2005 08:38:54 -0700
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 2 Nov 2005 08:42:34 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <FZb2mC.A.5hH.04NaDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>
23 mA xmfr would work good with .007 uF, so 21 caps of .15 uF 2 kV in
series for .0071 uF will work well with a copper tube subdivided sparkgap.
Dr. Resonance
hellow everyone, i am oredering some 0.047 1000V polypropelyne film
caps for my MMC. i dont know how many i should buy tho... i have
about 30$ and the caps cost $1.19 each. I am most likely using a
10KV OBIT as power source running at 23mA. Help would be very good, thanks
Daniel from Canada
_