[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Liquid resistive HV divider READY
- To: tesla@xxxxxxxxxx
- Subject: Liquid resistive HV divider READY
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 30 May 2005 12:33:31 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 30 May 2005 12:33:48 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <9oPeX.A.HsC.Ly1mCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Denicolai, Marco" <Marco.Denicolai@xxxxxxxxxxx>
Hello all,
Maybe some of you recall that once I was building a big HV divider
containing only water. Well, it is ready, it is working and now it has
also been documented. I have to thank Paul Nicholson for his help and
comments.
Pictures, data, mechanical drawings and even source code can be found
at:
http://www.iki.fi/dncmrc/wprobe/hv_divider.htm
In a nutshell:
- division ratio 153000:1
- max voltage 550 kV
- bandwidth 12 MHz
- loading impedance 1.6 Mohm, 0.76 pF
With that divider I can do voltage measurements of my Thor TC actually
contacting the top toroid.
Comments and feedback is welcome.
Regards