[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: transmission lines from transformer /was: First Light HELP



Original poster: "Dr. Resonance" <resonance@xxxxxxxxxx>


Don't do this --- you could blow your pig with a cap at the other end!!!

Dr. Resonance

>
> > Original poster: Esondrmn@xxxxxxx
> >
> > Drew,
> >
> > Not sure about the HV cables hissing. Do you have them laying on
> > the
> > cement? What kind of wire are you using? How close together are
> > they? I
> > use RG213 with the outer jacket and ground sheath removed and the
> > cables
> > are sitting on 2 x 4s on the cement.
>
> Not sure that this is recomended but I use x-ray HV cables
> with the grounding sheaths intact and gronded at the mains
> ground at the pole transformer. They certainly don't hiss
> in this setup although this may be a NO-NO from an RF kick
> back stand-point?? I've heard that this type of setup also
> causes a "Blumline effect" which causes voltage levels to
> reach much higher than the output voltage of the transformer
> itself, but I have not had any pole pig transformers to even
> hiccup from running like this. One reason I do it this way
> is to stop the hissing and to make it safer if the lines are
> touched while energized. I know the electrical utility com-
> panies must use this method on all of their underground power
> lines. Any observation/comments from others on this matter
> are welcome....
>
>
> David Rieben
>
>
>