[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Converting 1/4wave SSTC system to BIPOLAR . . . .
- To: tesla@xxxxxxxxxx
- Subject: Converting 1/4wave SSTC system to BIPOLAR . . . .
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 16 May 2005 17:29:07 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 16 May 2005 17:30:59 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <jK8VzC.A.2_G.y0SiCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Mccauley, Daniel H" <daniel.h.mccauley@xxxxxxxx>
Just a question here . . .
If i have a regular SSTC 1/4wave with grounded secondary, and i want to
convert to a bipolar arrangement using
the existing secondary, would the resonant frequency change (assume
there are no toroids at this time) or remain
the same???
Basically, i would use the existing SSTC driver and primary coil, and
place the existing secondary (non-grounded) midpoint through existing
primary coil.
Thanks
Dan