[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Quick Topload Question
- To: tesla@xxxxxxxxxx
- Subject: Re: Quick Topload Question
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 12 May 2005 20:32:11 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 12 May 2005 20:33:59 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <3tTkOB.A.neF.OIBhCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Dan Kunkel <dankunkel@xxxxxxxxx>
sounds about right...but only experimentation will tell. if you see a
lot of corona at the top of the secondary then you need to either move
the topload down, or add more capacitance to the topload (and then
retune the primary).
have fun!
Dan
On 5/12/05, Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "Daniel Koll" <dk_spl_audio@xxxxxxxxxxx>
>
> I don't know if this went through last time. I'm making a 12/30 static gap
> TC. Is 1.5"-1.6" ok from the last winding in the secondary to the bottom
> of my topload (6" steel sphere)? Thanks
>
>