[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: X-Ray Transformer VERY Scarred!

Original poster: "Daniel Koll" <dk_spl_audio@xxxxxxxxxxx>

I would say the color was tan to dark tan when looking down through it. The stuff that spilled was on a white ceramic tray (from a old microwave we used to have) and it was yellow in color (not having any depth to it).

From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: Re: X-Ray Transformer VERY Scarred!
Date: Mon, 02 May 2005 15:34:53 -0600

Original poster: "Brian" <ka1bbg@xxxxxxxxxxxxx>

yep, to burn pcb you would have to get the heat very high. it might be
castor oil or mineral or diala transformer oil. castor oil usually has a
kind of yellow look to it. cul brian f.
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Monday, May 02, 2005 2:55 PM
Subject: RE: X-Ray Transformer VERY Scarred!


> Original poster: "Daniel Koll" <dk_spl_audio@xxxxxxxxxxx>
>
> The paper burned (the oil was still wet, I tried right after dipping)
> almost instantly.  I would say 1/2 second after the flame hit it.  This is
> good news right?
>
> >From: "Tesla list" <tesla@xxxxxxxxxx>
> >To: tesla@xxxxxxxxxx
> >Subject: RE: X-Ray Transformer VERY Scarred!
> >Date: Mon, 02 May 2005 10:57:18 -0600
> >
> >Original poster: "Godfrey Loudner" <ggreen@xxxxxxxx>
> >
> >Hello Daniel
> >
> >Outside your home, burn of a small piece of paper dipped in the oil. If
> >the oil burns, it is not likely to be PCBs. If the oil does not burn, it
> >is most likely PCBs. Some people have an allergy to oil, even if its not
> >PCBs. You can get cork casket material from an engine auto shop.
> >
> >Godfrey Loudner
> >
> >Do you think this can contain PCBs?  I got the cover
> >off and the oil (or PCBs) splashed a little and got on my hands and
> >face.  The smell was pungent but not overwhelming.  I started to feel
> >sick
> >breathing it in.
> >
>
>
>
>
>