[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Baby Boy!

Original poster: "Jason and Christy" <jcwallace@xxxxxxxxxxx>

Hi Dan

congradtulations

since you want to use nothing but baby stuff you could use the film
canisters that your film comes out of to make your caps, just wrap the out
side with alumin tape and either wrap the inside with the tape and add wires
to the tape, or just put a bolt thou the lid and add salt water to it, good
luck on the baby and dont forget to cover when changing that water hose's
lol

jason wallace
----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, March 23, 2005 10:35 PM
Subject: Re: Baby Boy!


> Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
>
> Hi Dan,
>
> Congratulations!!!
>
> I think you can wind the secondary on one of those plastic baby
> bottles.  There is that plastic ring toy by Fisher Price that goes from
> smaller to larger "toroids" that has the perfect forms for the top load.
> :-)  Not much metal in baby stuff, but cribs used to have 1/4 inch steel
> slide rods to bend the primary from.  If he can get used to cold formula,
> he won't be needing that microwave oven transformer for warming bottles
> :o)  Probably plenty of plastics and foil stuff for the primary cap...
>
> Even baby Tesla coil builders have to use what they have available :O)))
>
> Cheers,
>
>          Terry
>
>
>
>
> At 07:36 PM 3/23/2005, you wrote:
> >Just to let everyone know, my wife Lenka gave birth to our first baby
> >yesterday at 2:30pm EST.
> >Michael Josef McCauley
> >7 lbs, 5 oz
> >
> >I wanted to name him Nikola, but Lenka just wouldn't go for it!
> >Now, to build his first tesla coil!
> >
> >Dan
>
>
>