[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Resulting static after TC runs
- To: tesla@xxxxxxxxxx
- Subject: Re: Resulting static after TC runs
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 01 Mar 2005 17:23:19 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Tue, 1 Mar 2005 17:23:25 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <VtRw-D.A.GGH.8dQJCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: jdwarshui@xxxxxxxxx
I believe that the top end capacitor can retain some charge, but this
is a rather weak charge. I suspect that this weak charge strongly
influence the accumulation of settling charges from the ionized gas
surrounding the coil. The separated static charge then sits atop the
first rate insulation that they put on the wire.
Two part resonant coils are like static charge sponges. You can draw a
spark to ground from either coil, or get a particularily nasty spark
between the two coils.