[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Copper Banding?
- To: tesla@xxxxxxxxxx
- Subject: Re: Copper Banding?
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 01 Mar 2005 10:46:55 -0700
- Delivered-to: email@example.com
- Delivered-to: firstname.lastname@example.org
- Old-return-path: <email@example.com>
- Resent-date: Tue, 1 Mar 2005 10:47:56 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <RP2fUB.A.ABG.KrKJCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Gerald Reynolds" <gerryreynolds@xxxxxxxxxxxxx>
I'm thinking that comparing 50ft of banded pri to 50ft of Cu tubing, in of
itself, might not be the best comparison, since with Cu tubing the pitch
needs to be say a 1/2 in (c-c) where with a band, the pitch can be closer.
Maybe the best comparison is using 50 ft of each conductor with the same
1/2 inch pitch so the band takes the same spiral path as the tubing.
Original poster: "david baehr" <dfb25@xxxxxxxxxxx>
In a previouse post, it was stated that a banded pri. would have less
inductance than a copper tubing pri. Could someone explain this ? IF YA
got 50' of copper tubing , and 50' of banded pri. , wouldnt be about the