[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Perfecting my final design...
- To: tesla@xxxxxxxxxx
- Subject: Re: Perfecting my final design...
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 15 Jun 2005 11:06:21 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Wed, 15 Jun 2005 11:09:23 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <yqLgmC.A.m5G.ADGsCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Adam R." <arabraxas@xxxxxxxxxxx>
Okay, I went and purchased the Cu tubing: two rolls of 20 feet 1/4"
OD....that gives me about 7.7 turns...should I just use the whole role or
go with only five turns?
Also, for the propeller gap, I bet I should go with 1/8": anything larger
and the motor might not be able to spin it. (or would a larger size be better?)