Re: ScanTesla 6.00.... and load models

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>

Hi Gerry,

The best model "I" have is that a streamer presents a load to the coil of 
222,000 ohms plus 1pF per foot of streamer.  So each foot of streamer is an 
added 1.0pF.

So if we go from primary bang energy to streamer model impedance the 
equations (Freau) is

Zs = 220000 ohm + 18.6 / 12 *sqrt("Energy/Bang")

I think that will be different in the DRSSTC case since they are more 
energy efficient without the spark gap...

That is also at 120 BPS, but coils seem to be not to concerned about PBS in 
the 100 to 240 BPS region.

Cheers,

        Terry


At 11:14 PM 6/14/2005, you wrote:

> > Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
> > Cload = length / 12  pF
>
> Do you mean Cload = length (ft) * 12pf / pf  ???