[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Perfecting my final design...(rotary gap)
- To: tesla@xxxxxxxxxx
- Subject: Re: Perfecting my final design...(rotary gap)
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Tue, 14 Jun 2005 17:06:49 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Tue, 14 Jun 2005 17:08:58 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <POQTnB.A.K-E.AO2rCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Adam R." <arabraxas@xxxxxxxxxxx>
For the propeller gap, I might even go with (the rods come in 12" lengths)
3/16" instead of 1/8", since the latter is kinda thin. What size seems
best? The rod will be cut to 7"