[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Help with my rotary gap (and other tuning problems).....
- To: tesla@xxxxxxxxxx
- Subject: Re: Help with my rotary gap (and other tuning problems).....
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 20 Jul 2005 15:17:44 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Wed, 20 Jul 2005 15:17:36 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <7-1Er.A.5rD.v9r3CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Adam R." <arabraxas@xxxxxxxxxxx>
Okay, I found a 2uF cap lying around....so now I have a 2uF and a
4uF, which in parallel gives 6uF, which you said is too high.
However, the start cap is 2uF, so, if I use the two 2uF I'll have
around 5uF (obviously, it might be under). But could I have the start
cap a 4uF when it is rated for 2uF? It doesn't seem like I couldd...