[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Tubing size
- To: tesla@xxxxxxxxxx
- Subject: Tubing size
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 11 Jul 2005 11:59:04 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 11 Jul 2005 12:00:26 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <-jsJfC.A.E3G.3Or0CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: trwalters001@xxxxxxxxxxx
Hi All,
When the copper tubing for a primary is discussed as being either 1/4" or
3/8", is that the industry-standard tubing size or the actual measured
diameter of the tubing?
The reason I ask is that 1/4" copper tubing measures 3/8" in diameterand
3/8" tubing measures 1/2" in diameter.
My 10" coil is going to be powered by nine (9) 15KV, 30mA transformers in
parallel (4 KVA). If anyone has comments or suggestions, please let me know.
Thanks!
Tim Walters