[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Large Foam Toroids
- To: tesla@xxxxxxxxxx
- Subject: Re: Large Foam Toroids
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 10 Jul 2005 11:16:41 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 10 Jul 2005 11:18:37 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <Yk3CN.A.5j.rhV0CB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "marc" <xp88@xxxxxxxxxxxxx>
I purchased an O. W. Landergren toroid several months ago. They are NOT
inexpensive!
But.. it is a sturdy, spun AU toroid. You will have to drill your own
center hole..
How do you modify a foam toroid? copper/aluminum tape?? Metallic spray
paint??
How do you mount it?
Marc
> [Original Message]
> From: Tesla list <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Date: 7/9/2005 4:14:49 PM
> Subject: Re: Large Foam Toroids
>
> Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>
>
> You may want to check with O. W. Landergren. I know
> you'd need a pretty big bulk buy, and they cost more,
> but maybe not too much more. They make some pretty big
> spun aluminum toroids:
>
> http://www.hot-streamer.com/adam/bigass_coil/toroid.jpg
>
> Adam
>
> --- Tesla list <tesla@xxxxxxxxxx> wrote:
>
> > Original poster: "Cameron B. Prince"
> > <cbp@xxxxxxxxxx>
> >
> >
> > Hey guys,
> >
> > David Rieben and I are planning on ordering a couple
> > of 48" x 12" foam
> > toroids from Global Foam Company.
> > (http://www.globalms.com) We wanted to
> > check with you all to see if any of you are also
> > interested so that we could
> > possibly place a bulk order.
> >
> > They have quoted us $345.00 for the toroid and
> > $142.00 for shipping, each.
> > We are hoping that we could get a break if we order
> > 10 or so. If you are
> > interested, please let one of us know.
> >
> > If any of you have alternative sources for large
> > toroids of this size,
> > please also let us know.
> >
> > Thanks,
> > Cameron
> >
> >
> >