[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: DRSSTC Field Plots
- To: tesla@xxxxxxxxxx
- Subject: Re: DRSSTC Field Plots
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 08 Jul 2005 10:32:52 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Fri, 8 Jul 2005 10:34:18 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <POxdYC.A.RZH.IsqzCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: boris petkovic <petkovic7@xxxxxxxxx>
Hi Terry,
> I think I am going to add a foot long rod with a 1
> inch ball on top to the
> coil too...
>
> http://hot-streamer.com/temp/drsstc-a-new-rod.gif
>
> Sparks straight up seem to be real cool and this
> certainly gets them away
> from the primary drive system!!
-----
Yes,I absolutely agree!
Not just becouse of the *coolness* and primary hits
prevention ,but becouse of the neat modeling in the
case of a vertical system symetry.
-----
>
I'll try to get it tested outside in the next few
> days...
>
> Cheers,
>
> Terry
-----
Maybe your DRSSTC is going to give a shot to catch up
S.Ward's DRSSTC arc lenghts in this new setup?
Who knows -;)
Regards,
Boris