[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: coil running of car battery(s)?
- To: tesla@xxxxxxxxxx
- Subject: RE: coil running of car battery(s)?
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 23 Jan 2005 21:58:00 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 23 Jan 2005 21:59:10 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <hGEm7B.A.EgD.UCI9BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Jerry White <starcatfisher@xxxxxxxxxxxxx>
Do you wave a drawing of the driver circkit for ickle tess? this is exactly
what I was thinking of and I beleve that it is exactly what is needed.I
don't mind using someone elses brain work. I am just glad that my idea
works even though I wasn't the first one to think of it! ;-)
Tesla list <tesla@xxxxxxxxxx> wrote:
Original poster: "Derek Woodroffe"
Devon,
I have built many small coils that run from batteries..
Millie Tess a 76V SSTC powered from AA Cells.
http://www.roffesoft.co.uk/tesla/millietess/millietess.htm
Nano Tess a 12 V SSTC (was the smallest SSTC in the world ;)
http://www.roffesoft.co.uk/tesla/nt/nanotess.htm
Ikle Tess a conventional coil powered from 12V and two Ignition Coils
http://www.roffesoft.co.uk/tesla/it/ikletess.htm
Tiny Tess a conventional coil powered from its own 2kv inverter. From 12V
http://www.roffesoft.co.uk/tesla/tinytess/tinytess.htm
I have even seen tabletop coils run from 12v to 240v off the shelf inverters
feeding NST's
But I'm not sure how that gets around CSA approval, 400W of mains derived
from car batteries is just as dangerous as mains from the wall. (although
current limited) Id check before you build anything.
Cheers
Derek