[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OLTC Measuring Peak Current



Original poster: "Derek Woodroffe" <tesla@xxxxxxxxxxxxxxx>

Antonio,
	Yes I have used your programs with some success, the problem is not
what is in the loop, but the connections and components in the loop(s).

	If the inductor was purely two turns of copper this would be an easy
calculation. The problems arise when you have connected a set of transistors
& capacitors within the loop, each component and length of copper adds
another amount of stray inductance to the total, making the result difficult
to calculate. Hence the method working back from resonance, that will give a
value from an actual system.

http://www.roffesoft.co.uk/tesla/oltc/oltc3.htm will illustrate the
problem..

	Cheers
		Derek