[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: party cup caps
- To: tesla@xxxxxxxxxx
- Subject: Re: party cup caps
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 05 Jan 2005 11:27:43 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Wed, 5 Jan 2005 11:31:29 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <gMQOkC.A.6ID.BKD3BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Blake Hartley <teslaspud@xxxxxxxxx>
i have made one of these caps before. within thirty seconds of
running, the cups were very warm and performance was very poor. just
switching to beer bottle caps brought the performance from .5 inches
to about two inches. unless there is no other option, dont use these.
Blake
On Wed, 05 Jan 2005 08:04:01 -0700, Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: Jerry White <starcatfisher@xxxxxxxxxxxxx>
>
> Hi all;
> Has any one had any experiance with these caps shown on Mem's Place?
>
<http://www.fortunecity.com/meltingpot/syria/1210/id20.htm>http://www.fortunecity.com/meltingpot/syria/1210/id20.htm
> I want to build a coil and have to watch every $. Thought that these
> might be a cheap way to start. I already have 2 9K,60 ma NSTs for a pwr.sup.
> Thanks, Jerry
>
>