[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Winding technique
- To: tesla@xxxxxxxxxx
- Subject: RE: Winding technique
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sun, 02 Jan 2005 21:52:59 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sun, 2 Jan 2005 21:53:31 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <kB8mAC.A.tFD.J_M2BB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Lau, Gary" <gary.lau@xxxxxx>
Same here - no problem seen, and much easier.
Gary Lau
MA, USA
> Original poster: "claudio masetto" <claudmas@xxxxxxxxxxxxxxx>
>
> It doesn't effect the insulation at all. I've had no insulation
problems.
>
> Claude.
> >Original poster: Rob Maas <robm@xxxxxxxxx>
> >>Another thing I have noticed is that a lot of coilers who wind their
> >>coils place the spool with the winding wire horizontal to the
secondary
> >>they are winding supported with some sort of bar. This is not
necessary.
> >>The spool can be sat upright and the wire will just unwind
beautifully.
> >>No problems with an overunning spool.
> >>
> >>Claude.
> >
> >But each unwound turn from the spool will add a 360 degr. twist
> >to the wire, which is not good for the isolation.
> >
> >Rob
> >
> >
> >
> >
>
>
>