[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: homemade rolled cap
- To: tesla@xxxxxxxxxx
- Subject: RE: homemade rolled cap
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 24 Feb 2005 23:06:47 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 24 Feb 2005 23:07:14 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <mpErVB.A.j7G.QCsHCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "david baehr" <dfb25@xxxxxxxxxxx>
Hi, I still use my( 3 ) TCBOR caps I made back in the early '90s , with
only one failure, that was repaired, I used 60mil poly and they held up to
my 14400v pig , so far........................but the mmc may be the way to go
>From: "Tesla list" <tesla@xxxxxxxxxx>
>To: tesla@xxxxxxxxxx
>Subject: homemade rolled cap
>Date: Thu, 24 Feb 2005 07:40:18 -0700
>
>Original poster: Bobby Amaya <dimon20042004@xxxxxxxxx>
>
>Hi everyone,
>
>Can anyone tell me how to build a good high
>voltage(40+kv) rolled cap that is not extreemely
>expensive?
>Bobby,
>
>=====
>
>