Re: new drsstc pics

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "colin heath" <colin.heath4@xxxxxxxxxxxx>

hi paul

I would bolt the line filter to the box, putting it on standoffs will reduce
> its effectiveness at high frequencies.  Was there a reason you did this,
> like to keep the grounds separate or something?  I have not built a solid
> state coil yet so you may have a good reason.
>
yes i did this to keep the grounds seperate but at the moment if i ground
the enclosure at all the feedback signal goes
cheers
colin

----- Original Message -----
From: Tesla list <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Wednesday, February 23, 2005 3:07 PM
Subject: Re: new drsstc pics


> Original poster: "Paul Benham" <paulb@xxxxxxxxxxxxxxxxxxxx>
>
> Hi Colin,
>
> I would bolt the line filter to the box, putting it on standoffs will
reduce
> its effectiveness at high frequencies.  Was there a reason you did this,
> like to keep the grounds separate or something?  I have not built a solid
> state coil yet so you may have a good reason.
>
> Cheers,
>
> Paul.
>
> ----- Original Message -----
> From: "Tesla list" <tesla@xxxxxxxxxx>
> To: <tesla@xxxxxxxxxx>
> Sent: Tuesday, February 22, 2005 11:52 PM
> Subject: new drsstc pics
>
>
>  > Original poster: "colin heath" <colin.heath4@xxxxxxxxxxxx>
>  >
>  > hi all,
>  >
>
<http://www.geocities.com/colinheath2002/DRSSTC.html>www.geocities.com/colin
> heath2002/DRSSTC.html
>  >
>  > this is the link to my new web page on drsstc build im doing. i hope to
>  > make it more technical as i progress.
>  > for now just pics of the build as it stands.
>  > cheers
>  > colin heath
>  >
>  >
>  >
>  >
>  > This message has been scanned for viruses by MailController -
> www.MailController.altohiway.com
>  >
>
>