[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Tiny DRSST was Re: Ultra tiny coils!
- To: tesla@xxxxxxxxxx
- Subject: Re: Tiny DRSST was Re: Ultra tiny coils!
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Sat, 12 Feb 2005 12:17:17 -0700
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Sat, 12 Feb 2005 12:22:26 -0700 (MST)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <9iydjB.A.8OF.ydlDCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Mddeming@xxxxxxx
In a message dated 2/12/05 12:25:19 AM Eastern Standard Time,
tesla@xxxxxxxxxx writes:
I admit I've never tried anything in the 20-30Mhz range, but I'm sure with
the right drive a 20-30Mhz coil is possible.
The issue that scares me is the detuning of the secondary with changing
conditions and accurately tracking that with such low powers and small
coils. At 27Mhz 1nS delay from feedback to driver becomes quite a problem.
Maybe a CB PLL could help ??
Hi,
has anyone considered the possible problems of operating a coil with peak
output in the CB / RC bands? Could result in some unhappy friends and
neighbors. Just a thought.
Matt D.