[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

MatchCAD files Re: DRSSTC stablity/ closed loop response

Original poster: "Bob (R.A.) Jones" <a1accounting@xxxxxxxxxxxxx>

Hi Adam

I have attached one file if you want more let me know.

http://hot-streamer.com/temp/closed_loop_phasesstsdesign44.mcd

Robert

----- Original Message -----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: <tesla@xxxxxxxxxx>
Sent: Friday, February 04, 2005 11:14 AM
Subject: RE: DRSSTC stablity/ closed loop response


> Original poster: "Adam Horden" <adamhorden@xxxxxxxxxxxx>
>
> Hello,
>
> Could you send me the MathCAD files? I would be interested to see them.
>
> Adam Horden
> http://www.acidtech.net
>
> msn: adamhorden@xxxxxxxxxxxx
>
>  > -----Original Message-----
>  > From: Tesla list [mailto:tesla@xxxxxxxxxx]
>  > Sent: 02 February 2005 23:41
>  > To: tesla@xxxxxxxxxx
>  > Subject: Re: DRSSTC stablity/ closed loop response
>  >
>  > Original poster: Esondrmn@xxxxxxx
>  >
>  > In a message dated 2/1/05 3:59:27 PM Pacific Standard Time,
>  > tesla@xxxxxxxxxx writes:
>  > Hi Terry,
>  >
>  > Do you still have MathCAD 2000? If you do I can send you a file/s that
>  > plots
>  > the frequency responses, input impedance etc. You can play with the
>  > parameters and perhaps get a feel for it. I also have a file some
> where
>  > that
....