[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Capacitor Size and BPS

Original poster: "Barton B. Anderson" <bartb@xxxxxxxxxxxxxxxx>

Hi John,
Yes, of course, but I can't model the ARSG without actual motor specs, so the SRSG as a general use is fine (decent ball park for ARSG). 

Take care,
Bart

Tesla list wrote:


Original poster: FutureT@xxxxxxx
In a message dated 12/25/05 10:03:23 PM Eastern Standard Time, tesla@xxxxxxxxxx writes: 

Bart,

The actual true break-rate of an ARSG system will always
be somewhat lower than the calculated break rate because
gap presentations that occur near the zero crossing of the
60 or 50Hz AC will be skipped (the voltage will be too low
to fire across the gap).  The break rate will still be quite
high of course.

John