[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Capacitor Help -> secondary help



Original poster: "Lau, Gary" <Gary.Lau@xxxxxx>

That's not too far from the mark.  The only significant thing I would
mention is to use your Variac to control the drill speed.  Also, be sure
to use the same rig when polyurethaning the secondary; keeping it
horizontal and rotating until it dries will prevent drips and runs.

My setup: http://www.laushaus.com/tesla/secondary.htm

Regards, Gary Lau
MA, USA

> Original poster: "MalcolmTesla" <tesla@xxxxxxxxxxxxx>
>
> I'm sure the pros are laughing :) that's OK though.  I've never done
this
> before and wasn't sure how else to do it.  I'm curious, how do the
rest of
> you wind your secondarys?  Oh and that's 20" of windings on 4"
diameter PVC
> with 27 AWG.
>
> Thanks guys
> Malcolm - KC
>