RE: small secondary question

["Tesla list" <tesla@xxxxxxxxxx>]

Original poster: "Qndre Qndre" <qndre_encrypt@xxxxxxxxxxx>

Hi,

maybe your primary circuit doesn't match the secondary's resonant frequency.

Regards, Q.

----Original Message Follows----
From: "Tesla list" <tesla@xxxxxxxxxx>
To: tesla@xxxxxxxxxx
Subject: small secondary question
Date: Wed, 30 Nov 2005 22:07:58 -0700

Original poster: "miles waldron" <mileswaldron@xxxxxxxxxxx>

Please see this link to a little secondary tried.

<http://www.gravitymagnet.com/images/IMG_0005.JPG>http://www.gravitymagnet.com/images/IMG_0005.JPG

There are some winding errors.

It is 1 and 1/4 inch in diameter and 9 and 1/2 inches of wound wire onto
pvc.

It has an unknown number of turns of what I was told was 30G platinum wire.

It measures exactly 15 ohms, and not open or short circuit.

When I spark this little guy up inside a primary and tank that are known
good (from another working coil)

I get nothing out the topwire. With toploads I still get nothing.

Any advice would be appreciated.