[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: rotary spark gap

To: tesla@xxxxxxxxxx
Subject: Re: rotary spark gap
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sat, 20 Aug 2005 00:22:57 -0600
Delivered-to: testla@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <vardin@twfpowerelectronics.com>
Resent-date: Sat, 20 Aug 2005 00:23:40 -0600 (MDT)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <feuNHC.A.T6F.pxsBDB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "D.C. Cox" <resonance@xxxxxxxxxx>

Contact me off-list. We sell a rotor with 1/2 dia brass axial feed thrus and screw-in 1/2 dia. brass / tungsten electrodes. At 10-15 kVA we use 1 inch dia. tungsten electrodes fitted to 1 inch dia. brass rod embedded in 3 x 3 inch brass blocks for cooling.

Dr. Resonance


Subject: rotary spark gap

Original poster: ClintLightning@xxxxxxx
i need one for a 10kva pig.

Prev by Date: Re: Looking for Voltage Control Switch Ideas
Next by Date: Re: Looking for Voltage Control Switch Ideas
Previous by thread: rotary spark gap
Next by thread: Re: Toroid Building, something new?
Index(es):
- Date
- Thread