[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Toroid Building
- To: tesla@xxxxxxxxxx
- Subject: Re: Toroid Building
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Fri, 19 Aug 2005 17:00:16 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Fri, 19 Aug 2005 17:00:38 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <xdgmRD.A.Y4E.VSmBDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>
Sounds kinda brittle (and heavy). I used drywall
compound for a smaller one and it worked out fine, but
I'm not so sure how it will work on a large scale. Why
not just try it with the corregations first? How about
Bondo? Works well, sands smooth, and is very durable.
Adam
--- Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: "Gerry Reynolds"
> <gerryreynolds@xxxxxxxxxxxxx>
>
> Hi All,
>
> I'm in the process of making a 8x32 inch toroid
> using the heavy
> ducting from McMaster-Carr
>
> I have the toroid formed (ends attached) and I plan
> to mount an AL
> disc in the center with a little RTV. I want to
> fill the
> corrigations with something that can be easily
> sanded to make
> smooth. I am planning on using PLASTER_of_PARIS for
> this purpose
> (done after the center disc is mounted for
> rigidity). After sanding
> smooth, I plan on sealing the plaster with a varnish
> and then adding
> AL tape starting and terminating on the AL disc.
>
> Does anyone see a problem with using the plaster??
> Grout is maybe
> another choice for a filler. Ideas welcomed.
>
> Gerry R.
>
>
>
____________________________________________________
Start your day with Yahoo! - make it your home page
http://www.yahoo.com/r/hs