[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Tesla Coil - Internal Arcing on Secondary
- To: tesla@xxxxxxxxxx
- Subject: Re: Tesla Coil - Internal Arcing on Secondary
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 18 Aug 2005 12:38:19 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Thu, 18 Aug 2005 12:48:34 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <_BrE4.A.C-G.5fNBDB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Brady Hauth <bhauth@xxxxxxxxx>
> The secondary wire itself should not be
> arcing to the form. There is no reason for this to happen.
If you get grease on the form, it will happen.