[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: secondary wire diameter
- To: tesla@xxxxxxxxxx
- Subject: Re: secondary wire diameter
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Wed, 17 Aug 2005 20:16:51 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <vardin@twfpowerelectronics.com>
- Resent-date: Wed, 17 Aug 2005 20:17:33 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <QjAtPC.A.qnF.7--ADB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Mddeming@xxxxxxx
In a message dated 8/17/05 7:51:54 P.M. Eastern Daylight Time,
tesla@xxxxxxxxxx writes:
i was there today - the guy told me that black colour is just a dye -
it doesn`t influence the electric strength of the pipe. but better to
be overcautious :-)
Hi Dmitry,
Almost all black dyes and pigments are at least partially carbon
based and so will be a weak point for tracking of HV on the surface.
Most plastic pipe salesmen don't know diddley about HV RF
applications as even big conduit doesn't carry over 500 V @ 50-60 Hz
unless it's custom made. Until you can afford another secondary on
short notice, better to play it safe and stay away from black.
Matt D.