[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Winding
- To: tesla@xxxxxxxxxx
- Subject: Re: Winding
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 11 Apr 2005 07:58:28 -0600
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 11 Apr 2005 08:03:06 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <zgnfrB.A.6JC.1LoWCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Yurtle Turtle <yurtle_t@xxxxxxxxx>
But a jig comes i handy if you decide to coat it (with
something other than shrink wrap). Helps prevent drips
and runs.
Adam
--- Tesla list <tesla@xxxxxxxxxx> wrote:
> Original poster: Terry Fritz
> <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
>
> Hi Steve,
>
<snip>
>
> It takes a few hours, but it is not bad at all. You
> could make winding
> jigs and such to, but those take a few hours to make
> as well and can make
> their own new complexities. For just one not too
> big coil, hand winding
> will do fine.
>
> Cheers,
>
> Terry
>
> At 05:24 PM 4/9/2005, you wrote:
> >What is the best way to wind a TC secondary? By
> hand?
> >
> >Steven Steele
>
>