[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: capacitance of homemade caps
- To: tesla@xxxxxxxxxx
- Subject: RE: capacitance of homemade caps
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Thu, 07 Apr 2005 17:24:41 -0600
- Delivered-to: chip@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Thu, 7 Apr 2005 17:28:49 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <4SjQ7C.A.uVH.hHcVCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: "Lau, Gary" <gary.lau@xxxxxx>
Well there are crappy grounds, and then there are crappy grounds
(couldn't resist)! But seriously, most household waste water pipes
these days are PVC. Not sure what they are under the streets, but it's
not clear that they'd be metallic. Cold water supply pipes are much
more likely to connect to a ground-worthy buried metal pipe.
Gary Lau
MA, USA
> Original poster: Terry Fritz <teslalist@xxxxxxxxxxxxxxxxxxxxxxx>
<snip>
> There are some folks that "flush" some bare wire down the toilet to
get to
> the sewer pipes which are very well grounded... Sort of "extreme",
but
> "electrically" sound ;-)) Might not be good at the top floor of a
tall
> building ;-))
>
> Cheers,
>
> Terry