[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Would this work? (air gap in ballast core)
- To: tesla@xxxxxxxxxx
- Subject: Re: Would this work? (air gap in ballast core)
- From: "Tesla list" <tesla@xxxxxxxxxx>
- Date: Mon, 04 Apr 2005 13:00:29 -0600
- Delivered-to: testla@pupman.com
- Delivered-to: tesla@pupman.com
- Old-return-path: <teslalist@twfpowerelectronics.com>
- Resent-date: Mon, 4 Apr 2005 13:05:14 -0600 (MDT)
- Resent-from: tesla@xxxxxxxxxx
- Resent-message-id: <WWHBnB.A.-h.n_YUCB@poodle>
- Resent-sender: tesla-request@xxxxxxxxxx
Original poster: Ed Phillips <evp@xxxxxxxxxxx>
You certainly need an air gap, but don't be so sure that those
laminations will fly apart if you cut the bonding strap. All of the C
cores I've seen have the laminations varnished together, with the faces
ground and polished for good fit. They come in two separate pieces.
Ed