Re: 16 kV 250 mA TC transformers

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Which part is the removable leg, the shunts??

Could one use sheared laminates and then finish off the critical surface and
come out cheaper??

Gerry R.

 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 > When tight fitting of the removeable leg (to aid winding) you need 1 mil
 > accuracy.  You can only achieve that with laser cutting not shearing.
 >
 > Dr. Resonance
 >
 >  >
 >  > I'm curious,  why do they have to be laser cut?
 >  >
 >  > Gerry R.
 >
 >