RE: Tuning SGTC's

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Tristan Steele" <ozonejunkie-at-westnet-dot-com.au> 

Thanks for the offer, but postage is not only expensive, but on occasion
slow when dealing trans-continentally.

Thanks
Tristan

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Tuesday, 28 September 2004 8:38 AM
To: tesla-at-pupman-dot-com
Subject: Re: Tuning SGTC's

Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>


Send me a SASE and I will copy the setup for tuning and send it to you.  It
makes more sense once you see the diagram of the setup.

Dr. Resonance

Resonance Research Corporation
E11870 Shadylane Rd.
Baraboo   WI   53913
  >
  > Hi All,
  >
  > My first coil is nearing completion, and I was wondering if someone can
  > offer some guidance on tuning this thing.  I have read in a number of
places
  > it is possible to accomplish tuning with a CRO and a signal generator as
  > appose to the 30% Variac method.  How does one go about doing this?  I
have
  > tried trawling the net, but with not much luck in this area.