[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 16 kV 250 mA TC transformers

To: tesla-at-pupman-dot-com
Subject: Re: 16 kV 250 mA TC transformers
From: "Tesla list" <tesla-at-pupman-dot-com>
Date: Mon, 27 Sep 2004 07:51:02 -0600
Resent-Date: Mon, 27 Sep 2004 07:51:24 -0600
Resent-From: tesla-at-pupman-dot-com
Resent-Message-ID: <3nE-iD.A.MAH.VrBWBB-at-poodle>
Resent-Sender: tesla-request-at-pupman-dot-com

Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net> 

Hi Dr R,

I'm curious,  why do they have to be laser cut?

Gerry R.


 > Original poster: "Dr. Resonance" <resonance-at-jvlnet-dot-com>
 >
 >
 > I was really hoping for a price in the $500 range or lower, but, the cores
 > are laser cut by Magnetic Metals and, being a CA company, they don't work
 > cheap.  Land costs/rental is very high out there.
 >
 > Dr. Resonance
 >

Prev by Date: Tuning SGTC's
Next by Date: high voltage technique for external access to x-ray transformer?
Prev by thread: Re: 16 kV 250 mA TC transformers
Next by thread: Re: 16 kV 250 mA TC transformers
Index(es):
- Date
- Thread