Re: coupling coefficient

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au> 

Secondary coil dia. is 6.25"

Claude.
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, September 22, 2004 11:42 PM
Subject: Re: coupling coefficient


 > Original poster: "D.C. Cox" <resonance-at-jvlnet-dot-com>
 >
 >
 >
 >
 >
 > What is the dia. of your secondary coil?   This is critical to setting
 > the best coeff. of coupling.
 >
 > Dr. Resonance
 >
 >  > Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au>
 >  >
 >  > Hello to all,
 >  > I have just calculated the coupling coefficient of my coil using a
 > program.
 >  > It calculates at 0.158.
 >  > Not knowing too much about this, I don't know if this is good or bad.
 > The
 >  > bottom turn of the secondary is level with the primary plane.
 >  >
 >  > Thanks
 >  > Claude.
 >  >
 >  >
 >  >
 >
 >