Re: Heatsinks

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Chris Swinson" <tesla-at-cps-electronics.co.uk> 


----- Original Message ----- From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, September 22, 2004 7:19 PM
Subject: Re: Heatsinks


>Original poster: "Jim Lux" <jimlux-at-earthlink-dot-net>
>How big and in what configuration?
>Brand new raw extruded heat sinks tend to run very close to what any other
>aluminum extrusion costs (check the price of aluminum), assuming you're
>using an existing shape.
>Machined heat sinks, in any form, are expensive.


The one I am looking at ive uploaded here.....

http://www.aqtq39.dsl.pipex-dot-com/temp/heatsink.jpg

its the bottom one, perfect in everyway...... apart from price :(


Cheers,
chris









>----- Original Message -----
>From: "Tesla list" <tesla-at-pupman-dot-com>
>To: <tesla-at-pupman-dot-com>
>Sent: Wednesday, September 22, 2004 6:42 AM
>Subject: Heatsinks
>
>
> > Original poster: "Chris Swinson" <tesla-at-cps-electronics.co.uk>
> >
> > HI all,
> >
> > Does anyone know wheres a good place to try for large heatsinks ? the > 
> ones
> > ive seen so far cost a small fortune :(
> >
> > cheers,
> > chris
> >
> >
> >
>
>
>