RE: coupling coefficient

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Day, Michael" <Michael.Day-at-USPTO.GOV> 

The values that I have seen posted rang from 0.080 to 0.25.

Mike Day

-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Monday, September 20, 2004 9:55 AM
To: tesla-at-pupman-dot-com
Subject: RE: coupling coefficient


Original poster: "David Trimmell" <humanb-at-chaoticuniverse-dot-com>

Hi Claude, what type of coil? SSTC, SGTC, etc.? For SSTC's I would shoot
for 0.2-0.3, what are the other coilers trying? Guys?!
   By the way how is your ISSTC coming? Hope the IGBT's have done well for
you.

Regards,

David Trimmell


-----Original Message-----
From: Tesla list [mailto:tesla-at-pupman-dot-com]
Sent: Sunday, September 19, 2004 10:42 AM
To: tesla-at-pupman-dot-com
Subject: coupling coefficient

Original poster: "claude masetto" <claudmas-at-optusnet-dot-com.au>

Hello to all,
I have just calculated the coupling coefficient of my coil using a
program.
It calculates at 0.158.
Not knowing too much about this, I don't know if this is good or bad.
The
bottom turn of the secondary is level with the primary plane.

Thanks
Claude.