[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: A question about UV and homemade plasma globes



Original poster: "robert heidlebaugh" <rheidlebaugh-at-desertgate-dot-com> 

I use about 2 drops / hour
      Robert   H
-- 


 > From: "Tesla list" <tesla-at-pupman-dot-com>
 > Date: Sun, 24 Oct 2004 18:47:45 -0600
 > To: tesla-at-pupman-dot-com
 > Subject: Re: A question about UV and homemade plasma globes
 > Resent-From: tesla-at-pupman-dot-com
 > Resent-Date: Sun, 24 Oct 2004 18:54:16 -0600
 >
 > Original poster: "Ed Phillips" <evp-at-pacbell-dot-net>
 >
 > "
 > Bob: I have used auto airconditioner  and other compressors for vacuum
 > pumps
 > and you nead a small oil input to prevent burn out. I use an oil input
 > to
 > the vacuum side through a small tube silver soldered to the input side.
 > A
 > small tube such as a hypodermic needle works well to inject light oil
 > like
 > 10 wt oil.  Air tool oilers also works.  Oil will collect in the exhaust
 > so
 > you should have a catch can to stop an oil mess .
 > Robert   H"
 >
 > How much oil is needed and how do you tell when you have enough?
 >
 > Ed
 >
 >