[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Coil Woes
Original poster: "Gerry Reynolds" <gerryreynolds-at-earthlink-dot-net>
Hi Gary,
Have you tried 2.8 * Cres with your 7x30 toroid? I would think that with 4
* Cres, you would not be able to charge to full output voltage. You might
get greater bang energy with a smaller cap. With my 15/60 setup, I get the
caps charged to 24KV with 2.5 * Cres.
Gerry R.
> Original poster: "Lau, Gary" <gary.lau-at-hp-dot-com>
>
> I know that I recently swapped my 7x30 toroid for a 6x24 toroid. The
> bigger toroid would only breakout reliably from a breakout point and
> delivered my longest streamers. The smaller toroid didn't need a point
> and readily broke out all over the toroid with shorter streamers,
> probably similar to what you were saying. This was with my 15/60, sync
> RSG, and a Cres*4.0 cap in both cases.
>
> Gary Lau
> MA, USA
>