[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: If correct, this will change everything!!



Original poster: Terry Fritz <teslalist-at-twfpowerelectronics-dot-com>

Hi Steve,

I had the 10V in there to use as an initial condition so I could ring down 
the shorted primary system to determine its stand alone resonant 
frequency.  I had since forgotten it.

You are correct, this initial condition seems to be having some odd affect 
on the model!!  If I set it to 100V then I get 5 millions volts on the 
output!!!

I will try and sort this out but it does appear there may be an error in 
the analysis!!

Cheers,

         Terry


At 04:51 PM 10/3/2004, you wrote:
>Hi again,
>
>I hope im wrong, but it seems like ive found something about your
>simulation that makes it look exceptionally *good*.  You gave the tank
>capacitor an initial charge, and that seems to have made all the
>difference.  Im not sure why because it was only set to 10, which i
>assume may mean 10v, but maybe 10kv?  Anyway, resetting the IC
>(initial charge) to 0 made things look just normal.  60kv on the
>topload, a bit over 1kv on the tank cap, and not even 20A in the
>primary (... huh??).  Anyway, just looks like a mismatched setup :-(.
>
>Maybe *I* missed something???  But now you have me thinking of something 
>new...
>
>Steve