[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: G10 Supplier.

To: tesla@xxxxxxxxxx
Subject: Re: G10 Supplier.
From: "Tesla list" <tesla@xxxxxxxxxx>
Date: Sun, 28 Nov 2004 10:45:58 -0700
Delivered-to: teslarchive@pupman.com
Delivered-to: tesla@pupman.com
Old-return-path: <teslalist@twfpowerelectronics.com>
Resent-date: Sun, 28 Nov 2004 10:46:47 -0700 (MST)
Resent-from: tesla@xxxxxxxxxx
Resent-message-id: <4aaY_.A.8y.87gqBB@poodle>
Resent-sender: tesla-request@xxxxxxxxxx

Original poster: "Bunny Killer" <bunikllr@xxxxxxxxxxxxx>

Try McMaster Carr but consider the GPO-3 material better thermal capacity but... a bit harder to cut...

Scot D

Tesla list wrote:

Original poster: "Hydrogen18" <hydrogen18@xxxxxxxxxxxxx>
What are some good places to buy G10 online? I want 1/4 inch thick material. This is for a spark gap rotor. Google isnt very helpful.
---Eric

Prev by Date: Anti-spam in place on pupman.com
Next by Date: RE: tungsten alloys for SG electrodes?
Previous by thread: Re: G10 Supplier.
Next by thread: Re: G10 Supplier.
Index(es):
- Date
- Thread