Re: Epoxy doesnt work.

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "john cooper" <tesla-at-tesla-coil-dot-com> 

I had this prob recently, solved by using a clean piece of glass to mix the 
epoxy on, then mixing and mixing and mixing some more, until it began to 
set, then I applied it.


---------- Original Message ----------------------------------
From: "Tesla list" <tesla-at-pupman-dot-com>
Date:  Tue, 27 Apr 2004 21:03:03 -0600

 >Original poster: Ed Phillips <evp-at-pacbell-dot-net>
 >
 >Tesla list wrote:
 > >
 > > Original poster: "Jim Mitchell" <Electrontube-at-sbcglobal-dot-net>
 > >
 > > If its 5 minute epoxy make SURE that you mix it VERY well or it wont work.
 > >
 > > Regards - Jim Mitchell
 >
 >	If there's ANY catalyst in it it should harden eventually, particularly
 >if you help it along with a hair dryer or heat gun.  If there's too much
 >catalyst (which is in the "hardener" resin) you're SOL.
 >
 >Ed
 >
 >
 >