[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: SSTC hits 66"



Original poster: "Eastern Voltage Research Corporation" <dhmccauley-at-easternvoltageresearch-dot-com> 

Thanks.  The pictures were taken with a Canon D60 digital SLR.

 > Awsome Dan!!
 > And your pictures are great. Are they taken on the
 > film or with a digital camera?
 > The PCB boards will be avalaible to order?
 >
 > teslina
 >  >
 >  >
 > --- Tesla list <tesla-at-pupman-dot-com> wrote:
 >  > Original poster: "Eastern Voltage Research
 >  > Corporation" <dhmccauley-at-easternvoltageresearch-dot-com>
 >  >
 >  >
 >  > I just finished my new PSSTC (Pulsed SSTC) and have
 >  > hit 66" so far with
 >  > minimal tuning and pretty shoddy primary tank wires
 >  > (12 AWG).
 >  >
 >  > Specifications from these photos:
 >  > DC Bus Voltage:  335VDC
 >  > Primary Capacitor:  0.11uF, 12kV MMC
 >  > Fres:  111 kHz
 >  > Pulsewidth:  250us
 >  > PRF:  100 Hz
 >  >
 >  >
 >  > The whole webpage describing my coil can be seen
 >  > here:
 >  > http://www.easternvoltageresearch-dot-com/sstccoil05.htm
 >  >
 >  > Arc photo prior to my full-bridge blowing up.  (See
 >  > secondary to primary arc
 >  > which initiated failure)
 >  > Distance from toroid to right wall is approximately
 >  > 70 inches.
 >  >
 > http://www.easternvoltageresearch-dot-com/images/isstc_arcs_bwtitle.jpg
 >  >
 >  > Full size arc photo of BW above (color)
 >  >
 > http://www.easternvoltageresearch-dot-com/images/isstc_arcs_fullsize01.jpg
 >  >
 >  > 55 inch POWER STRIKE to ceiling
 >  >
 > http://www.easternvoltageresearch-dot-com/images/isstc_arcs05.jpg
 >  >
 >  >
 >  > Dan
 >  >
 >  >
 >
 >
 >
 >
 >